Super Heavy Duty Workshop Table - Dimensions & Drawings

All workshop tables are 32" tall and built with the tabletop built using 4" thick timbers that are 6" wide. The legs are 4x6's just like the tabletop and there is plenty of reinforcement underneath to be virtually indestructible.

The legs are recessed 12" under the table for the 6 ft version. The 5 ft version has the legs recessed 9" and the 4 ft version has the legs recessed 6". If you prefer the legs closer to the perimeter of the tabletop, let us know in the comment section during checkout).

The 6' x 6' size weighs approximately 650 lbs. The 5' x 5' version comes in at a respectable 520 lbs and the 4' x 4' version at 380 lbs. This table can be made any size just let us know what you need. The actual table sizes are a bit smaller due to the size of the timbers used. The 6'  x 6' table is actually 69"  x 69". The 5' x 5' version is 57 1/2"  x 57 1/2" and the 4' x 4' version is 46" x 46". 

The Super Heavy Duty table was designed for a small engines high school workshop in Louisiana in 2004. The class liked them so much they ordered more in 2005 and again in 2006. If you are planning to use it in a demanding application, we recommend the Douglas-fir wood grade. Douglas-fir is structurally stronger than Redwood and will work best in any indoor or covered patio work environment. For exterior applications, Redwood may be a better choice for very long term decay resistance in moist climates. Please see our wood grades page for more information.